Healix Conmem Pro Gold Rotary Dental Files25-06% 21mm

Product Description

HEALIX PRO GOLD ROTARY FILES are Made in India Control Memory NiTI Rotary files. They are heat treated files.HEALIX CONMEM PRO GOLD ROTARY FILES are rotary files for conducting root canal treatment.It belongs to the third generation of Rotary Endodontic Instruments.It is extremely simply to use.These files help in cleaning and shaping of the root canal complex in accordance with Schilders objectives. It requires minimal effort and provides the clinician with excellent results.These are available in 21mm and 25mm.
 
HEALIX PRO GOLD ROTARY FILES with Controlled Memory are up to 300% more resistant to cyclical fatigue compared to other NiTi files* which substantially helps reducing the incidence of file separation.
No rebound + Extreme flexibility= Superior canal tracking
 
These files have been manufactured utilizing a unique process that controls the material’s memory, making the files extremely flexible but without the shape memory of other NiTi files. This gives the file the ability to follow the anatomy of the canal very closely, reducing the risk of ledging, transportation or perforation.
Regains shape after sterilization = Multi-use
 
The shape and strength of files with straightened spirals can be restored during autoclave and reused. Files not returning to original shape should be discarded.
 
Healix® CONMEM PRO GOLD ROTARY FILES can be used with crown-down, step-back or our recommended single length technique.
 
Step by step instructions to use these rotary files:
Sx-Golden, S1-Purple, S2-White,F1-Yellow,F2-Red,F3-Blue
Step 1: Use manual K-File Preparation upto numbers #20 K-File. Create straight-line access to the canal orifice(s) with emphasis on flaring, flattening, and finishing the internal axial walls.
Step 2: Start the Endomotor (preferable Healix Endomatic Endomotor). Use the Sx File. Set Speed to 300 rpm and Torque 4.8 ncm or 48 mncm. Conduct orifice opener and create straight line access to the canal orifice with emphasis on flaring, flattening, and finishing the internal axial walls.
Step 3: Use S1 File.Set torque to 4.8 or 48. Take the S1 file -4 of the working length. Eg. if Apex is 20, go till 16.Use BRUSH AND FOLLOW MOTION TECHNIQUE.
Step 4: Use S2 At Torque of 1.5 ncm or 15mnm. Go full working length. Use BRUSH AND FOLLOW MOTION