Maarc Dental MTA Unidose Kit

Product Description

• Indirect pulp capping
• Direct pulp capping / partial pulpotomy
• Cavity liner/base
• Pulpotomy
• Apexogenesis & Apexification
• Perforation repair
• Root-end filling
• Obturation

• Tricalcium silicate
• Dicalcium silicate
• Tricalcium aluminate
• Calcium oxide
• Radiopacifier and modifiers in traces

• Working Time: Approx 4 mins
• Initial setting: 15 mins at room temperature and it attains strength to continue the treatment.
• Strength on setting: 60 MPa

• Sterile glass slab, spatula and all instruments for the insertion of MAARC
• Dispense Powder as per requirement and a drop of distilled water till the hydrated. (Liquid provided)
• The MTA paste is obtained by mixing powder and liquid to obtain putty like consistency.
• The mix is then placed in the desired location.
• Condensed lightly with a moistened cotton pellet.
• Warning and Precautions:

• It must be kept in its sealed packaging prior to use to avoid degradation by moisture.
• It must be placed intra-orally immediately after mixing with liquid, to prevent dehydration.
• Avoid skin contact to prevent irritation and possible Allergic response. If contact with skin occurs, immediate Remove material with cotton and wash thoroughly.
• In case of skin sensitization or rash, discontinue use and seek medical attention.
• Do not use MAARC MTA to fill root canal, its viscosity and setting time are inadequate for this procedure also it will be very difficult to remove in case of 
• Excess of MAARC MTA is not intended as it may impair healing process.
• Do not use it on patients with reported sensitivity to any of the component.