Ivoclar Te-Econom Plus Composite Light-Curing, Radiopaque Hybrid Composite Intro Kit

Product Description

• Restorations of Classes I to V
• Esthetic anterior restorations
• Posterior restoration of stress-bearing areas.

• Excellent physical properties.
• Good polishability.
• High radiopacity.
• Long Working time.
• Proven Ivoclar Vivadent technology and quality.

• Excellent physical properties.
• Good polishability.
• High radiopacity.
• Long Working time.
• Wide range of shades for aesthetic matching.
• Dental bonding agent for strong adhesion.
• Phosphoric acid gel for enamel etching.
• Options for pulp protection.
• Easy handling and light-curing.

• Select the appropriate shade for the restoration.
• Isolate the treatment area, preferably using a rubber dam, to ensure a clean and dry working environment.

• Prepare the tooth cavity as required by the adhesive technique.
• Clean the prepared cavity with a water spray and air dry it to achieve a dry surface.

• If needed, apply a pulp protector, such as calcium hydroxide, covering only areas close to the pulp.
• Apply a pressure-resistant cement (e.g., Vivaglass Liner) if required.

• Position a matrix (e.g., OptraMatrix) and an interdental wedge if necessary to establish the proper shape for the restoration.

• Apply Eco-Etch first on the enamel and then on the dentin.
• Allow it to react for 30 seconds on enamel and 15 seconds on dentin.
• Rinse thoroughly with a water spray and dry the tooth surfaces with oil-free compressed air. Avoid dehydrating the dentin.

• Apply a generous amount of Te-Econom Bond to both enamel and dentin using the provided applicator brush.
• Gently brush the material into the dentin for 10 seconds.
• Evaporate any remaining solvent with a slow stream of air.
• Light cure the adhesive according to the recommended curing times, ensuring complete coverage.

• Apply Te-Econom Flow in layers of up to 2 mm and light cure according to the recommendations.
• Apply Te-Econom Plus in layers of up to 2 mm and contour the material with suitable instruments (e.g., OptraSculpt).
• Polymerize each layer individually according to the provided instructions.

• Finish the restoration with appropriate finishers or fine diamonds.
• Check the occlusion.
• Polish the restoration with silicone polishers (e.g., OptraPol Next Generation) for a smooth, aesthetically pleasing result.