kulzer Charishma Syringe Composite Kit

About this Product

COMPOSITION:

Charisma Smart is based on a BIS-GMA matrix and contains approximately 59% filler by volume with a particle size of 0.005 – 10 μm: Barium Aluminum Fluoride glass, highly dispersive silicon dioxide

Light intensity

LED curing light Kulzer Translux® light curing unit or any other blue-light unit (wavelength maximum at 460 – 470 nm; light output of 1550 – 550 mW/cm²)

Instructions:

• The light curing times mentioned above are the minimum times recommended and should not be reduced in order to achieve optimal restoration quality and physical properties of the material.
• When building up large restorations or those, which require lengthy time to complete the overhead operating lightshould temporarily be turned off or aimed away from the working area in order to prevent premature curing of the composite. 
• To avoid waste after the material hasbeen applied from the syringe, relieve, the internal pressure by unscrewing the plunger a quarter turn.
• Close the cap of the syringe after every use.

Storage:

Keep out of direct sunlight. Do not store above 25°C (77°F). Do not use the material after the expiration date. Please quote batch number and expiry date in all correspondence about the product.

Contraindications:

• Application to dentine close to the pulp (less than 1 mm)
• Do not use in cases of a known allergy to any of the constituents of Charisma Smart
• The use of this product is contraindicated in case of known or suspected allergies against (meth)acrylate compounds

Side effects:

This product or one of its components may in particular cases cause hypersensitive reactions. If suspected, information on the ingredients can be obtained from the manufacturer

Precautions:

1.Avoid contact with skin. Wear suitable protective gloves. In case of contact with skin, immediately wash with plenty of water and soap. May cause sensitisation by skin contact.

2.Avoid contact with eyes. Immediately and thoroughly rinse with plenty of water in case of contact with eyes and contact an ophthalmologist.

3.In the case of deep cavity preparations in close proximity to the pulp or a direct pulpal exposure, cover the dentine or the exposure locally with a calcium hydroxide liner covered with a glass ionomer cement before applying the adhesive.

• Do not use eugenol, thymol or phenol containing materials in or around the cavity preparation being restored, because these may interfere with the proper curing of Charisma Smart. • Use adequate protection for syringes to prevent from any contamination. Do not reuse after contamination.

4. Composites should only be used when having reached room temperature.