Dentsply Spectrum Kit

Product Description

• Restorations of all cavity classes in anterior and posterior teeth.

• Patients who have a history of severe allergic reaction to methacrylate resins or any of the other components

• TEGDMA
• Dimethacrylate
• Multifunctional polymethacrylate
• Camphorquinone
• Ethyl-4(dimethylamino)benzoate
• Butylated hydroxytoluene (BHT)
• UV stabilizer
• Barium-aluminium-borosilicate glass (mean particle size < 1 µm)
• Silanated barium-boron-fluoro-alumino-silicate glass (mean particle size < 1 µm)
• Highly dispersed silicon dioxide (particle size 10-20 nm)
• Fluorescent agent
• Iron oxide pigments • Titanium dioxide

• Clean the tooth surface with a fluoride free prophylaxis paste (e.g. Nupro® prophylaxis paste). 2. Prepare cavity (unless not necessary, e.g. cervical lesion). 3. Use adequate isolation such as rubber dam. Do not desiccate the tooth structure.
• (Matrix placement and wedging (Class II restorations))

• Apply material in increments immediately after the application of the adhesive. The material is designed to be cured in increments up to a 3 mm depth/thickness.
• Protect the restorative material on the mixing pad against light.

• Light cure each area of the restoration surface with a suitable curing light.3 Minimum light output must be at least 500 mW/cm2. Refer to curing light manufacturer’s Instructions for Use for compatibility and curing recommendations.
• Cure each layer accordingly to the mentioned amount of time

• Contour the restoration using finishing burs or diamonds. 2. Use Enhance® finishing devices for additional finishing. 3. Prior to polishing, check that surface is smooth and free of defects. 4. For achieving a very high luster of the restoration, we recommend ceram.x® gloss, Enhance® and PoGo®, finishing and polishing instruments, Prisma® Gloss™ Regular and Extrafine polishing paste.