D-Tech Restore glass

Product Description

D-Tech restores glass is Humid-Stable glass ionomer restorative cement suitable for the restoration of prepared teeth and restorations of class III, V& limited Class I cavities. This glass ionomer cement (gic) is known for its aesthetic looks and can be used for core build-up. D Tech Glass ionomer cement (GIC) is truly economical restorative cement.

Technical Information:

• Mixing Time 23°C - 30 second
• Working time B 23°C - 2:00 min
• Setting time B 23°C - 4:00 min
• Shelf life - 2 years

Directions:

Mixing:
Dispense powder and liquid onto the pad. Using a plastic spatula, divide the powder into 2 equal parts. Mix the first portion with all the liquid for 10 seconds. Incorporate the remaining portion and mix the whole thoroughly for 15 - 20 sec. (total time within 30 seconds)

Restorative Technique:

1. Prepare tooth using standard techniques. Extensive mechanical retention is not necessary. For pulp, capping use calcium hydroxide paste.
2. Wash & Dry but DO NOT DESICCATE. D-Tech’s dentine conditioner is recommended to remove the smear layer.
3. Mix the required amount of cement. Working time is 2 min. from the start of mixing at 23’C (73.4’ F). Higher temperatures will shorten working time.
1. Remove surface moisture but DO NOT DESSICATE.
2. Transfer cement to the preparation using a syringe or suitable placement instrument. avoid air bubbles.
3. Form the contour and place a matrix if required during the first 2 minutes of the setting.
4. Setting time is 4 min. after the start of mixing. Once set, remove the matrix & immediately apply D-Tech’S varnish.

Indications:

RESTORE GLASS is a truly economical restorative cement with aesthetic looks

1. Restoration of primary teeth
2. Core build-up
3. Restorations of Class III, V, and limited Class I cavities.
4. The standard powder to liquid ratio is

Dispensing Instructions:

2.8/1.0 g.1 level scoop of powder to 2 drops of liquid.
1. For accurate dispensing of powder, lightly tap the bottle against the hand. Do not shake or invert.
2. Hold the liquid bottle vertically and squeeze gently.
3. Close the bottle immediately after use.